Cadillac® CG Condensate Meter
The Meter of Choice – Top Rated by Industry Experts
The Cadillac® CG Gravity Condensate Meter is a totalizing meter which measures liquid or condensate. In any steam system where condensate is available, the CG Gravity Condensate Meter is the number one choice due to Cadillac®’s accuracy, reliability and infinite rangeability. No other meter has the capability to measure full rated capacity or a drop at a time, while maintaining an accuracy of +/- 1% of consumption.
The underlying principle of the CG Gravity Condensate Meter is: one pound of steam equals one pound of water. Based on this principle, the volume of the condensate measurement can be converted into a measurement of steam consumption. Cadillac® does this by measuring the volume of condensate while adjusting for the density. This produces a reading in pounds.
Steam is measured either as a commodity to be bought and sold, or to determine the efficiency of a given system. Therefore, the efficiency and reliability of the metering equipment cannot be over-emphasized. No other meter has the capability to measure full rated capacity or a drop at a time, while maintaining an accuracy of +/- 1% of consumption. This is important because steam loads vary widely with seasons and time of day. Cadillac® CG Gravity Condensate Meters can handle all such variations and are not affected by any pressure fluctuations in the steam system.
Expand All | Collapse AllApplications & Features
Cadillac® CG Condensate Meter – Applications
The Cadillac® CG Gravity Condensate Meter is a totalizing meter which measures liquid or condensate. This meter can be applied effectively for the following purposes:
- Data Source for energy management system, DCS, district-wide systems.
- Energy-Customer billing from accurately totalized flow measurements.
- Basis for internal cost distribution using campus-wide systems.
- Process monitoring from central control rooms.
Cadillac® CG Condensate Meter – Features
In any steam system where condensate is available, the CG Gravity condensate meter is the number one choice due to Cadillac®’s accuracy, rangeability, longevity, and modern electronics.
- Accuracy: +/-1% of the reading Capable of measuring full-rated capacity or a drop at a time while maintaining an accuracy of +/- 1% of the flow rate.
- Rangeability: From 0 to full-rated capacity with seasonal steam load variation, the need for a large turndown is essential. Cadillac® Condensate Meters are the only meters that will accurately measure down to virtually no flow.
- Longevity: 100 Years and still going strong Meters in service for over 50 years are common. With proper maintenance Cadillac® Condensate Meters will provide reliable, accurate service for many years.
- Modern Electronics: Meeting the challenges of the next millennium Meters are equipped with electronics capable of registering locally, remotely or interfacing with energy.
Operation Principles
Cadillac® CG Condensate Meter – Operation Principles
Cadillac® CG Gravity condensate meter operates in the following way. The metering drum consists of 6 scroll shaped compartments. Liquid enters the meter through an axially mounted inlet spout at the center of the drum. As each compartment fills, the excess overflows into the next. This action shifts the center of gravity causing the drum to rotate. The number of filled compartments can be directly converted into steam consumption.
Each of the six precision compartments fills fully and uniformly and tilts the rotor by gravity to advance to the net identical compartment.
Dimensions & Specs
Cadillac® CG Condensate Meter – Dimensions
The Cadillac® CG Condensate Meter’s dimensions are outlined below. Please reference the letters with the chart for each meter size.
| Meter Size | A | B | C | D | E | F | G |
| CAPACITY(LB/HOUR) | 250 | 500 | 750 | 1,500 | 3,000 | 6,500 | 12,000 |
| CAPACITY(LB/REV) | 2 1/2 | 5 | 7 1/2 | 15 | 30 | 65 | 120 |
| CAPACITY(GAL/MIN) | 1/2 | 1 | 1 1/2 | 3 | 6 | 13 | 24 |
| INLET PIPE SIZE | 1/2″ | 1/2″ | 1/2″ | 3/4″ | 3/4″ | 1″ | 1 1/4″ |
| OUTLET PIPE SIZE | 1 1/4″ | 1 1/2″ | 1 1/2″ | 2″ | 2 1/2″ | 3″ | 3″ |
| K(OA width) | 11 5/8″ | 11 5/8″ | 16″ | 16″ | 22″ | 22″ | 22″ |
| L(Loa w/ mech. counter) | 8 5/8″ | 10 5/8″ | 9 1/2″ | 11 7/8″ | 13 3/8″ | 18 3/4″ | 27 3/4″ |
| L(Loa w/ elect counter) | 11 1/8″ | 13 1/8″ | 12″ | 14 3/8″ | 15 7/8″ | 21 1/4″ | 30 1/4″ |
| M(OA height) | 11 1/4″ | 11 1/4″ | 16 1/4″ | 16 1/4″ | 22 3/4″ | 22 3/4″ | 22 3/4″ |
| N(inlet to-outlet CL) | 5″ | 5″ | 7 1/4″ | 7 1/4″ | 10 5/8″ | 10″ | 10″ |
| P(base to outlet CL) | 1 3/8″ | 1 3/8″ | 1 5/8″ | 1 5/8″ | 2 1/8″ | 2 1/2″ | 2 5/8″ |
| S(inlet to outlet faces) | 1 3/16″ | 1 3/16″ | 1 3/16″ | 1 3/16″ | 1 1/4″ | 1 1/4″ | 1 3/8″ |
| WEIGHT, NET | 32 Lbs | 38 Lbs | 58 Lbs | 69 Lbs | 140 Lbs | 185 Lbs | 264 Lbs |
| SHIPPING | 45 Lbs | 50 Lbs | 85 Lbs | 95 Lbs | 190 Lbs | 240 Lbs | 375 Lbs |
Cadillac® CG Condensate Meter – Engineering Specifications
The Cadillac® Condensate Meter shall consist of a metal housing, a rotary volumetric measuring drum and a totalizer. The fluid shall be measured by isolating the flow in a scroll-shaped container, six of which shall be provided in the drum.
Materials Of Construction
The meter shall be of materials that are mutually compatible in steam condensate service. The casing shall be constructed of cast iron or stainless steel. The metering drum shall be constructed of machine formed copper or stainless steel. All joints shall be full penetration welds using welding rod of suitable composition for the base metal. Fittings, fasteners and brackets shall be constructed of bronze, brass, stainless steel or high temperature polymers. Bearing bushings shall be constructed of Rulon Gold. External parts such as totalizers may be constructed of high temperature polymers.
Assembly
All metering drum seams shall be readily accessible for visual inspection. Meter parts shall also be easily accessed for maintenance and replacement and shall be arranged to operate without vibration within +/-1% accuracy throughout the entire range from 0-100% full rated capacity. Meter drums may be specified to +/- 0.50% accuracy throughout entire range from 0-100% full capacity.
Totalizer
Meter shall be equipped with a totalizer which shall indicate the quantity of fluid that has passed through the meter since the last reading. Such totalizer shall require no external power source and shall provide a resettable option, an anti-tampering device option and separate contact closure interface for energy monitoring systems. Local or remote mounting options shall be available.
Installation
Cadillac® CG Condensate Meter – Installation
The Cadillac® CG Condensate Meter has two types of installation – gravity and vacuum.Gravity Installation
A gravity installation is intended for use on heating systems where the steam condensate flowing from the meter by gravity is at or near atmospheric pressure.The condensate receiver is optional in an installation where the condensate temperature is moderate and steam traps in the system are reliable enough to prevent excessive steam from reaching the meter. Steam trap selection should include consideration of reliability and uniform flows to the meter. Float and thermostatic traps are generally recommended.It’s important to note that a properly installed F&T trap can actually be located below the meter with moderate steam pressures that will move the condensate up to the meter. This allows the greatest layout flexibility. Refer to trap manufacturer for details.Use of a receiver is recommended in several cases. System design may require that very hot condensate be handled. A receiver is a convenient way to allow for flashing. The receiver also provides surface area for cooling. Flow surges that briefly exceed the capacity of the meter are also accommodated by the receiver.Where several meters are required in parallel because of large flows or several streams, a receiver is an excellent solution. Multiple receiver inlets or outlets reduce header requirements. Receivers are generally sized for a nominal hold time of 5 to 10 minutes depending on surge and flash conditionsVacuum Installation
Vacuum-rated condensate meters are used for metering on the suction side of a vacuum pump. A thermostatic air valve is recommended as shown.The vacuum installation is used where condensate is brought back to the power plant through a common return line. In this installation, the master trap isolates the heating system from the vacuum. A reliable, uniform flowing trap such as a float and thermostatic unit is recommended.If the individual traps are reliable enough to prevent steam leakage into the return line, the master trap may be omitted and the meter installed with an air bypass.The air bypass should be used whenever air may enter the system. Care in vertical positioning is required to avoid condensate flowing through the air bypass. Vacuum pump controls should permit continuous operation of the vacuum pump in order to ensure drainage of condensate from the meter.An optional vacuum receiver following the meter also levels out flow conditions.
Parts & Kits
Cadillac® CG Condensate Meter – Drums and Parts
The Cadillac® CG Condensate metering drum is the heart of the Cadillac® Condensate Meter. Cadillac® Meter is recognized for building the drum extra tough, with more metal than the original. We guarantee the same patented design with the same precision.
Cadillac® Meter Drums and Parts include:
- All welded construction which provides strength
- No lead seams
- Virtually permanent calibration
- Exact replacement Cadillac® Condensate Meter spout parts – this helps maintain excellent accuracy
Cadillac® CG Condensate Meter – Maintenance Kits
Cadillac® CG Condensate Meter Maintenance Kits are complete packages of all of the items that you need to rebuild a Cadillac® Condensate Meter. It has already been preassembled as to limit your time on site. Meter maintenance kits are available for both cast iron/brass and stainless steel meters. All parts are 100% interchangeable, except for the casing gaskets.
Our customers tell us that a typical meter rebuild using our complete packaged kit takes about one hour. Our kits include:
- Bearing Assemblies
- All Gaskets
- All Fasteners
- Counter Drive Shaft with Cross Arm
- Drum Bearing Rings (E-G Kits only)
See more details on what parts are included for each kit.
| Maintenance Kit Part Numbers | ||
| Cast Iron/Brass | Stainless Steel | Description |
| KA103 | KA103-S | Size “A” |
| KB104 | KB104-S | Size “B” |
| KC105 | KC105-S | Size “C” |
| KD106 | KD106-S | Size “D” |
| KE107 | KE107-S | Size “E” |
| KF108 | KF108-S | Size “F” |
| KG109 | KG109-S | Size “G” |
| Qty. | Maintenance Kit Parts |
|---|---|
| 2 | Bearing Bracket Roller Assy |
| 3 | Spout Screws |
| 14 | Flange Bolts |
| 1 | Flange Gasket |
| 1 | Spout Gasket |
| 1 | Counter Drive Shaft w/ Cross Arm |
| 1 | Counter Drive Shaft Bushing |
| 6 | Counter Housing Screws |
| 1 | Counter Housing Gasket |
| 2 | Bearing Bracket Roller Assy |
| 3 | Spout Screws |
| * | Flange Bolts *(E-32, F-40, G-48) |
| * | Flange Nut *(E-32, F-40, G-48) |
| 2 | Flange Gasket |
| 1 | Spout Gasket |
| 1 | Counter End Bearing Ring |
| 1 | Spout End Bearing Ring |
Cadillac® CG Condensate Meter – Totalizer Specifications & Parts
The Cadillac® Condensate Meter Maintenance Kits contain the following parts. Where multiple parts are shown, they apply to their respective meter size as indicated by the blue letter in the part number.
Our Cadillac® Condensate Meter Totalizers incorporate the most modern electronics available. All working parts are hermetically isolated from the condensate. Totalizers are available in local, remote, and combination units. The local version shown bolts directly to the meter. No wiring is required. The totalizer parts are also offered for electronic and mechanical units.
Totalizer features include:
- 8 Digit counter fully calibrated for your application
- Contact closure output for energy management system
- 2 Year replaceable internal battery with back-up battery
- High temperature and humidity resistant
- Complete installation kit included
- Magnetic sensor technology
- Easily installed
The stand calibrations for the totalizer are shown below.
| Meter Size | A | B | C | D | E | F | G |
| Capacity For Model | EA140 | EB140 | EC140 | ED140 | EE140 | EF140 | EG140 |
| LB/Switch Closure | 0.4167 | 0.8333 | 1.2500 | 2.5000 | 5.0000 | 10.8333 | 20.0000 |
| Nominal Closures/Min. | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Reading Multiplier, 1= | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
Price List
Cadillac® CG Condensate Meter – Price List
Our prices are outlined below. In order to estimate the price of your meter, please choose an item from each centralized row within each chart. Should you have any questions about the price list, please don’t hesitate to contact us directly for your free quote. Call us (888) 556-3913.
| LOW CAPACITY GRAVITY METERS (1,500 Lbs/Hr or Less) | ||||||
| CG | Cadillac Gravity Condensate Flowmeter | Base | ||||
| A | Capacity: (0-250) Lbs/Hr – (0-0.5) GPM | $3,400.00 | ||||
| B | Capacity: (0-500) Lbs/Hr – (0-1.0) GPM | $3,475.00 | ||||
| C | Capacity: (0-750) Lbs/Hr – (0-1.5) GPM | $3,620.00 | ||||
| D | Capacity: (0-1,500) Lbs/Hr – (0-3.0) GPM | $4,095.00 | ||||
| LC | Local Counter with Indicator/Totalizer | $0.00 | ||||
| RC | Remote Counter with Indicator/Totalizer | $300.00 | ||||
| LR | Local & Remote Counter with Indicator/Totalizer | $500.00 | ||||
| S | Stainless Steel Casing and Internals | $0.00 | ||||
| C | Cast Iron Casing with Copper/Brass Internals | $695.00 | ||||
| R | Reconditioned Cast Iron casing and internals*** | $0.00 | ||||
| S | Calibrated to 1% accuracy across meter flow range | $0.00 | ||||
| H | Calibrated to 0.5% accuracy across meter flow range | $300.00 | ||||
| HIGH CAPACITY GRAVITY METERS (3,000 – 12,000 Lbs/Hr) | ||||||
| CG | Cadillac Gravity Condensate Flowmeter | Base | ||||
| E | Capacity: (0-3,000) Lbs/Hr – (0-6) GPM | $4,785.00 | ||||
| F | Capacity: (0-6,500) Lbs/Hr – (0-13) GPM | $5,075.00 | ||||
| G | Capacity: (0-12,000) Lbs/Hr – (0-24) GPM | $5,635.00 | ||||
| LC | Local Counter with Indicator/Totalizer | $0.00 | ||||
| RC | Remote Counter with Indicator/Totalizer | $300.00 | ||||
| LR | Local & Remote Counter with Indicator/Totalizer | $500.00 | ||||
| S | Stainless Steel Casing and Internals | $0.00 | ||||
| C | Cast Iron Casing with Copper/Brass Internals | $995.00 | ||||
| R | Reconditioned Cast Iron casing and internals*** | $0.00 | ||||
| S | Calibrated to 1% accuracy across meter flow range | $0.00 | ||||
| H | Calibrated to 0.5% accuracy across meter flow range | $300.00 | ||||
*** Note: Reconditioned Casings may not be available for all sizes. Please call to confirm
| In addition to the above new meters, ask us about completely reconditioned meters. Especially in the smaller sizes, that could be a very cost effective solution since there is no difference in performance between new and reconditioned meters. | ||
| CONDENSATE METER MAINTENANCE KITS | ||
| Part No. | Description | Price |
| Cast Iron/Copper Meter Rebuild Kits | ||
| KA103 | Size A | $350.00 |
| KB104 | Size B | $350.00 |
| KC105 | Size C | $350.00 |
| KD106 | Size D | $350.00 |
| KE107 | Size E | $680.00 |
| KF108 | Size F | $680.00 |
| KG109 | Size G | $680.00 |
| Stainless Meter Rebuild Kits | ||
| KA103-S | Size A | $350.00 |
| KB104-S | Size B | $350.00 |
| KC105-S | Size C | $350.00 |
| KD106-S | Size D | $350.00 |
| KE107-S | Size E | $680.00 |
| KF108-S | Size F | $680.00 |
| KG109-S | Size G | $680.00 |
| METER KITS INCLUDE: Bearing Assemblies All Gaskets All Fasteners Dial Glass – With or withour wiper (If requested otherwise not included in kit) Totalizer Drive Shaft with Cross Arm Drum Bearing Rings (?E-G? Kits only) |
||
| CONDENSATE METER DRUMS & PARTS | ||
| Part No. | Description | Price |
| Copper Drums & Parts | ||
| AA103 | Copper-Welded Metering Drums Size A | $1,110.00 |
| AB104 | Copper-Welded Metering Drums Size B | $1,170.00 |
| AC105 | Copper-Welded Metering Drums Size C | $1,390.00 |
| AD106 | Copper-Welded Metering Drums Size D | $1,710.00 |
| AE107 | Copper-Welded Metering Drums Size E | $2,280.00 |
| AF108 | Copper-Welded Metering Drums Size F | $2,550.00 |
| AG109 | Copper-Welded Metering Drums Size G | $2,860.00 |
| M0134 | Totalizer End Bearing Ring A-D | $95.00 |
| M0135 | Spout End Bearing Ring A-D | $85.00 |
| M0145 | Drum Flange E-G | $95.00 |
| M0146 | Totalizer End Bearing Ring E-G | $125.00 |
| M0147 | Spout End Bearing Ring E-G | $125.00 |
| B0108 | Drum Bearing Ring Screws E-G | $0.60 |
| Stainless Drums & Parts | ||
| AA103-S | Stainless-Welded Metering Drums Size A | $950.00 |
| AB104-S | Stainless-Welded Metering Drums Size B | $1030.00 |
| AC105-S | Stainless-Welded Metering Drums Size C | $1,285.00 |
| AD106-S | Stainless-Welded Metering Drums Size D | $1,550.00 |
| AE107-S | Stainless-Welded Metering Drums Size E | $1,950.00 |
| AF108-S | Stainless-Welded Metering Drums Size F | $2,150.00 |
| AG109-S | Stainless-Welded Metering Drums Size G | $2,415.00 |
| M0134-S | Totalizer End Bearing Ring A-D | $95.00 |
| M0135-S | Spout End Bearing Ring A-D | $85.00 |
| M0145-S | Drum Flange E-G | $95.00 |
| M0146-S | Totalizer End Bearing Ring E-G | $125.00 |
| M0147-S | Spout End Bearing Ring E-G | $125.00 |
| B0108-S | Drum Bearing Ring Screws E-G | $0.60 |
| CONDENSATE METER SPOUTS & PARTS | ||
| Part No. | Description | Price |
| Brass Spouts & Parts | ||
| MA110 | Spout A | $100.00 |
| MB110 | Spout B | $100.00 |
| MC110 | Spout C | $100.00 |
| MD111 | Spout D | $110.00 |
| ME112 | Spout E | $115.00 |
| MF113 | Spout F | $120.00 |
| MG114 | Spout G | $165.00 |
| B0117 | Spout Screws Stainless Steel A-D | $0.90 |
| B0106 | Spout Screws Stainless Steel E-G | $0.95 |
| Polymer Spouts & Parts (for SS meters) | ||
| MA110-P | Spout A | $95.00 |
| MB110-P | Spout B | $95.00 |
| MC110-P | Spout C | $95.00 |
| MD111-P | Spout D | $100.00 |
| ME112-P | Spout E | $105.00 |
| MF113-P | Spout F | $110.00 |
| MG114-P | Spout G | $135.00 |
| B0117 | Spout Screws Stainless Steel A-D | $0.90 |
| B0106 | Spout Screws Stainless Steel E-G | $0.95 |
| CONDENSATE METER BEARINGS, PARTS & ASSEMBLIES | ||
| Part No. | Description | Price |
| Copper/Brass | ||
| AR101 | Bearing Roller Assembly R – Gold A-D | $120.00 |
| AH101 | Replaced by part number AR101 | |
| AZ101 | Replaced by part number AR101 | |
| S0100 | Bearing Bracket A-D | $70.00 |
| H0111 | Bearing Roller A-D | $17.00 |
| KR111 | Bearing Roller w/ Bushing R – Gold A-D | $22.00 |
| KH111 | Replaced by part number KR111 | |
| KZ111 | Replaced by part number KR111 | |
| MS120 | Bearing Pin Stainless Steel A-D | $3.00 |
| M0120 | Replaced by part number MS120 | |
| MR119 | Bearing Bushing R – Gold A-D | $3.95 |
| MH119 | Replaced by part number MR119 | |
| MZ119 | Replaced by part number MR119 | |
| B0128 | Cotter Pin A-D | $0.50 |
| B0117 | Bearing Bracket Screws A-D | $0.90 |
| K0115 | Flange Nut & Bolt A-D | $1.50 |
| AR102 | Bearing Roller Assembly R – Gold E-G | $160.00 |
| AH102 | Replaced by part number AR102 | |
| AZ102 | Replaced by part number AR102 | |
| M0214 | Bearing Bracket E-G | $75.00 |
| M0122 | Bearing Roller E-G | $40.00 |
| KR112 | Bearing Roller w/ Bushing R – Gold E-G | $45.00 |
| KH112 | Replaced by part number KR112 | |
| KZ112 | Replaced by part number KR112 | |
| M0123 | Bearing Pin w/ Hole & E Clip E-G | $6.75 |
| K0114 | Replaced by part number MS123 | |
| HR128 | Bearing Bushing R – Gold E-G | $4.95 |
| HH128 | Replaced by part number HR128 | |
| HR128B | Replaced by part number HR128 | |
| HZ128 | Replaced by part number HR128 | |
| B0123 | E-Clip E-G | $3.00 |
| B0124 | Cotter Pin E-G (Cast Brackets ONLY) | $0.50 |
| K0116 | Bearing Bracket Nut & Bolt E-G | $1.75 |
| B0122 | Bearing Bracket Washer E-G | $1.20 |
| K0117 | Flange Nut & Bolt E-G | $1.75 |
| EO136 | Rotor Base with (6) Magnets | $130.00 |
| MANOP/MT | Operations & Maintenence Manual | $35.00 |
| Stainless Steel | ||
| AR101-S | Bearing Roller Assembly R – Gold A-D | $120.00 |
| S0100-S | Bearing Bracket A-D | $75.00 |
| HO111-S | Roller Bearing A-D | $17.00 |
| KR111-S | Roller Bearing w/Bushing R – Gold A-D | $22.00 |
| MS120 | Bearing Pin Stainless Steel A-D | $3.00 |
| MR119 | Bearing Bushing R – Gold A-D | $3.95 |
| BO128 | Cotter Pin A-D | $0.50 |
| BO117 | Bearing Bracket Screws A-D | $0.90 |
| KO115-S | Flange Nut & Bolt A-D | $1.50 |
| AR102-S | Bearing Roller Assembly R – Gold E-G | $160.00 |
| MO214-S | Bearing Bracket E-G | $75.00 |
| MO122-S | Bearing Roller E-G | $42.00 |
| KR112-S | Bearing Roller w/Bushing R – Gold E-G | $47.50 |
| MO123 | Bearing Pin w/Hole & E Clip E-G | $6.75 |
| HR128 | Bearing Bushing R – Gold E-G | $4.95 |
| B0123 | E-Clip E-G | $3.00 |
| KO116-S | Bearing Bracket Nut & Bolt E-G | $1.85 |
| KO116-SS | Bearing Bracket Nut & Bolt E-G (SS Casing Only) | $1.85 |
| BO122-S | Bearing Bracket Washer E-G | $1.10 |
| KO117-S | Flange Nut & Bolt E-G | $1.85 |
| KO117-SS | Flange Nut & Bolt E-G (SS Casing Only) | $1.60 |
| EO136 | Rotor Base with (6) Magnets | $130.00 |
| MANOP/MT | Operations and Maintenance Manual | $35.00 |
| CONDENSATE METER GASKETS | ||
| Part No. | Description | Price |
| Cast Iron/Brass | ||
| GA103 | Flange Gasket A | $7.50 |
| GB104 | Flange Gasket B | $9.00 |
| GC105 | Flange Gasket C | $10.00 |
| GD106 | Flange Gasket D | $14.00 |
| GE107 | Flange Gasket E | $20.00 |
| GF108 | Flange Gasket F | $24.00 |
| GG109 | Flange Gasket G | $32.00 |
| Stainless Steel | ||
| GA103-S | Flange Gasket A | $7.50 |
| GB104-S | Flange Gasket B | $9.00 |
| GC105-S | Flange Gasket C | $10.00 |
| GD106-S | Flange Gasket D | $14.00 |
| GE107-S | Flange Gasket E | $20.00 |
| GF108-S | Flange Gasket F | $24.00 |
| GG109-S | Flange Gasket G | $32.00 |
| Both Meter Types | ||
| G0110 | Spout Gasket A-C | $4.00 |
| GD116 | Spout Gasket D | $4.00 |
| GE117 | Spout Gasket E | $5.00 |
| GF118 | Spout Gasket F | $5.00 |
| GG119 | Spout Gasket G | $6.00 |
| GZ130 | Totalizer Housing Gasket A-G | $4.00 |
| G0112 | Dial Glass Gasket A-G | $4.00 |
| CONDENSATE METER TOTALIZERS | ||
| Part No. | Description | Price |
| Local Electronic Totalizers | ||
| EA140 | Size A | $480.00 |
| EB140 | Size B | $480.00 |
| EC140 | Size C | $480.00 |
| ED140 | Size D | $480.00 |
| EE140 | Size E | $480.00 |
| EF140 | Size F | $480.00 |
| EG140 | Size G | $480.00 |
| Remote Electronic Totalizers | ||
| EA141 | Size A | $615.00 |
| EB141 | Size B | $615.00 |
| EC141 | Size C | $615.00 |
| ED141 | Size D | $615.00 |
| EE141 | Size E | $615.00 |
| EF141 | Size F | $615.00 |
| EG141 | Size G | $615.00 |
| Remote & Local Electronic Totalizers | ||
| EA142 | Size A | $805.00 |
| EB142 | Size B | $805.00 |
| EC142 | Size C | $805.00 |
| ED142 | Size D | $805.00 |
| EE142 | Size E | $805.00 |
| EF142 | Size F | $805.00 |
| EG142 | Size G | $805.00 |
| CONDENSATE METER TOTALIZER PARTS | ||
| Part No. | Description | Price |
| E0115 | 10? Cable w/ Single Connector A-G | $45.00 |
| E0109 | 20? Cable w/ Dual Connectors A-G | $80.00 |
| E0127 | Closure Cap for Receptacle | $2.00 |
| E0106 | Obsolete – replace with part number EA140, EB140, EC140, ED140, EE140, EF140 or EG140 |
|
| H0109 | Totalizer Drive Shaft Bushing | $6.75 |
| K0126 | Totalizer Drive Shaft w/ Crossarm | $11.50 |
| B0104 | Electronic Totalizer Housing Screws (6/Pkg.) | $4.50 |
| E0145 | Electronic Readout Replacement | $170.00 |
| EL140 | Battery | $9.25 |
| Earlier Models | ||
| S0101 | Dial Glass 2-7/8″ Diameter w/ Wiper (Sizes A-G) | $21.00 |
| H0113 | Dial Glass Retaining Ring (Sizes A-G) | $6.00 |
| H0115 | Dial Glass 2-7/8″ Diameter (Sizes A-G) | $10.00 |
